EB3 Baseboard Radiator Installation and Operation Manual

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock,

and injury to persons, including the following:

1. Read all instructions before using this heater.

!HEATERHASHOTANDARCINGORSPARKINGPARTSINSIDE$ONOTUSEITINAREASWHEREGASOLINEPAINTORFLAMMABLELIQUIDS

are used or stored.

3. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such

as furniture, pillows, bedding, papers, clothes, and curtains away from heater.

4OPREVENTAPOSSIBLEFIREDONOTBLOCKAIRINTAKESOREXHAUSTINANYMANNER$ONOTUSEONSOFTSURFACESLIKEABED

where openings may become clogged.

$ONOTINSERTORALLOWFOREIGNOBJECTSTOENTERANYVENTILATIONOREXHAUSTOPENINGASTHISMAYCAUSEANELECTRICALSHOCK

or fire, or damage the heater.

6. Use heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire,

electric shock, or injury to persons.

SAVE THESE INSTRUCTIONS

Operation & Maintenance

MAINTENANCE

Your Runtal Electric Baseboard has been designed to require the absolute minimum maintenance and care

under normal use. However, care should be taken when cleaning the surface of the panel. Periodically vacuum

across the top of the grille to remove dust from the grille. A slight odor may be noticeable during initial

operation and will dissipate within a few hours.

CLEANING

The baseboard’s powder coated finish provides an elegant yet durable finish to a welded steel product.

Occasional cleaning of this finish is best done with a water dampened cloth. Under no circumstances should

abrasive cleaner be used. Before cleaning make sure the power has been turned off at the circuit breaker panel,

and the heating element is cool. Be sure to restore power when cleaning and maintenance is complete.

All other servicing should be performed by qualified service personnel.

For installation of multiple electric baseboard radiators, the following chart should be used. The chart indicates

supply voltage, circuit breaker rating, minimum wire size, and maximum total wattage of electric baseboard

radiators on the circuit.

MAXIMUM WATTAGE ON A CIRCUIT

Voltage A.C. Circuit Breaker Size Maximum Wattage Wire Size

120 15 Amp 1440 14/2 with Ground

120 20 Amp 1920 12/2 with Ground

120 30 Amp 2880 10/2 with Ground

208 15 Amp 2496 14/2 with Ground

208 20 Amp 3328 12/2 with Ground

208 30 Amp 4992 10/2 with Ground

240 15 Amp 2880 14/2 with Ground

240 20 Amp 3840 12/2 with Ground

240 30 Amp 5760 10/2 with Ground

RUNTAL NORTH AMERICA, INC.

0/"OX7ARD(ILL-!(AVERHILL

Tel: 800-526-2621

VIn Canada: 888 829-4901