Operating instructions

28
6.2.3 Timer
In Time-mode press the „VIEW” button until the following display appears on
the display:
Timer adjustment
 In the setting mode select „Settings” point from the menu  select
„Timer“.
 Then adjust the hours, minutes and seconds for the timer.
Timer use:
 In the display mode Timer press the „ST./STP" button to start or stop
the timer.
 If the timer is stopped, press the "LAP/RESET" button, to reset the timer
at the time set previously.
 When timing is finished, during the last 10 seconds a Beep will be given
for each second. When it reaches to 0, a longer Beep will be heard.
Press any key to stop this Beep tone.
Timer
Current time