Operating instructions

52
 Press the MODE button to accept the changes and return to
the previous menu.
Delete path
 Press and hold the MODE button to enter the watch's menu.
 Select NAVIGATION from the menu  DelPath
 Use the ST/STOP or Lap/RESET buttons to scroll through the
saved paths.
Creating a path
Setting of measurement interval
When you start the GPS Navigation, the watch will create a path
(and save it to the path number you chose in the previous step. If
you do not create any waypoints, the path will show 1 waypoint.
The GPS watch records the path continuously. You can manually set
how often the measurements are performed, from 1 second up to 10
minutes. The basic setting is 4 seconds:
 In the setting mode select „Workout” point  Tracklog.
 Then adjust the interval desired for measurements
Waypoints can be created each time a lap is recorded. This must
be set in the watch's workout settings:
 Press and hold the MODE button to enter the watch's menu.
 Select WORKOUT from the menu  SmartLap  Lap-Waypoint
 Use the ST/STOP or Lap/RESET buttons to Highlight "On"
 Press the VIEW button to turn on the Lap to Waypoint Feature
 Use the ST/STOP or Lap/RESET buttons to scroll through and
display a path (from 1 to 10) to record. Previously recorded
paths will have a number to the right of the path number that
indicates the number of waypoints for that path.