Operating instructions

54
Before you begin, choose the path, the navigation-mode and the
waypoint-radius, as described below:
8.5.1 Navigation Mode
There are three different types of navigation:
 Waypoint-navigation: Here you choose an individual waypoint
on the active path that becomes the location to which you will
be directed. Choose this navigation type when you want to go
to a specific point along the recorded path. Each subsequent
waypoint must be manually selected. Select the waypoint in
the “go-to-display” (see below).
 Forward-navigation: Forward navigation will take you from the
first to the last waypoint on a path. Choose this navigation
when you want to follow a previously recorded path from start
to finish. As you reach each waypoint, the next waypoint is
automatically loaded into the “go-to-display” as your next goal
until you finish the path.
 Backward-navigation: This navigation will take you from where
you are back to the beginning of your path. Choose a waypoint
on the path and the watch will automatically load each of the
previous waypoints in the Go-to display until you reach the
start of the path.
Choosing Navigation-modes
 Press and hold the MODE button to enter the watch's
menu.
 Select NAVIGATION from the menu  NavMode
 Use the ST/STOP or Lap/RESET buttons to Highlight
"waypoint," "forward," or "backward."
 Press the MODE button to accept the setting and return to
the previous menu.