User's Manual

TEMPUR-Ergo
™
Basic
Operating Instructions
MANUAL ADjUSTMENT OF HEAD AND FOOT
Head (1,2)
This function adjusts the Head section to
the desired position.
Press the HEAD UP button (1).
Keep pressing the button until the desired
height is reached.
Press the HEAD DOWN button (2).
Keep pressing the button until the desired height is
reached.
Leg (3,4)
This function adjusts the Leg section to the
desired position.
Press the LEG UP button (3).
Keep pressing the button until the desired
height is reached.
Press the LEG DOWN button (4).
Keep pressing the button until the desired height is
reached.
Flat (5)
Press and hold the FLAT button (5) for 3
seconds, and the bed frame will
automatically move to its complete at position.
NOTE: Ensure all obstructions are clear of the
base’s undercarriage when lifting or lowering
the base’s head and leg sections to avoid risk
of pinching or damage.
NOTE: When the movement to the flat position
is active it is possible to interrupt the movement
with ANY button at any time during movement
for safety reasons.
Preset Memory Positions (6,7)
The system offers two (2) Preset
Memory Positions.
Hold either button for 5 seconds, until the lights
ash 3 times. When they stop, memory is stored.
NOTE: When the new position of the head is
higher than the current position of the head,
first the head section and then the leg section
move to the corresponding memory position.
NOTE: If the new position of the head is equal
or lower than the current position of the head,
first the leg section and then the head section
move to the corresponding memory position.
NOTE: When the movement to a memory
position is active it is possible to interrupt the
movement with ANY button, at any time during
movement for safety reasons.
To ensure safe operation of the system, please observe the following safety instructions:
CAUTION: Keep children away from electrically adjustable beds and control units. There is risk of injury
and electric shock.
CAUTION: Unplug the power cord during a thunderstorm or if you do not intend to use the system for an
extended period of time.
NOTE: Do not put the remote control button-side down.
NOTE: The actuators will continue moving until you release button or the maximum height is reached.
18
Customer serviCe: 1–800–821–6621