Owner's Manual

RC-RF08D-1

Remote Control Operation Guide

IMPORTANT:

Read advisory information in the owner’s

manual carefully before using this product.

The potential for electrical shock exists if

electrical components are not installed or

operated properly.

OOT UPBUTTON

Press and hold to raise the foot section.

FOOT DOWN BUTTON

Press and hold to lower the foot section.

LAT BUTTON

Press and hold to lower the head and foot

sections simultaneously.

EAD UPBUTTON

Press and hold to raise the head

section.

HEAD DOWN

BUTTON

Press and hold to lower the head

section.

M1 BUTTON

Press to lift the bed to the “M1” preset

profile

BUTTON

Press to lift the bed to the “M2” preset

profile

LIGHT BAR BUTTON

Press to turn on and off the light

bar at the bed.

PAGE 1
RC-RF08D-1 Remote Control Operation Guide HEAD UP BUTTON Press and hold to raise the head section. HEAD DOWN BUTTON Press and hold to lower the head section. M1 BUTTON Press to lift the bed to the “M1” preset profile LIGHT BAR BUTTON Press to turn on and off the light bar at the bed. IMPORTANT: Read advisory information in the owner’s manual carefully before using this product. The potential for electrical shock exists if electrical components are not installed or operated properly.
PAGE 2
Federal Communications Commission (FCC) Statement 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.