User's Manual

Decelerates/ Closes foot vibrating feature: press “I” button until it increases to the desired strength. Then
release “I” button.
※ Explanations for Items 3 and 4
When you use the regular vibration, there are 8-zones of massage. The strength of vibration in each zone can be
adjusted to different levels. The head and foot areas can also be modified separately. When the user presses
the “F” and “H” buttons, the vibration is automatically programmed to be on the fourth level; however, the user
can strengthen the vibration to the eighth level or weaken it to the first level.
When you need to turn off the vibrating function, press the button to the first level and then press “G” and “I”
buttons to weaken the vibration. This will automatically stop the vibrating function. When the user wants to
turn on the vibrating function, he or she can press “F” and “H” buttons.
Additionally, if the user continuously presses “J” button, the LED signature light will be on after 2 seconds.
When the light is on, release “J” button. The user can then turn off the vibrating functions at any level.
5. Moves the entire bed to a flat position
Press “E” button continuously. After two seconds, release “E” button when LED light is on. The head and foot
mechanism will recover to the original flat position within 30 seconds. During the recovery process, if the user
presses any up or down buttons, the flat recovery function will stop. If the bed was previously programmed
with a vibrating message function, it will keep the same vibrating function 30 seconds after it recovers to the
flat position.
6. Starts vibration in a circular fashion /Choosing the Circular Vibrating Function
Regardless of the whether the original vibrating function is on or off, when the user presses the “J” button the
circular vibrating function will start. Generally speaking, there are four different types of wave functions. If the
user wants to change the rhythm, he or she only needs to press “J” button. The vibrating feature in the foot area
will turn off first. Then the head area will vibrate at high and low strengths before switching to a new vibrating
rhythm.
7. Turning off the vibrating function
The same as item 6, press “J” button continuously. After 2 seconds, release “J” button when the LED signature
light is on. In this kind of situation, the user can turn off the vibrating function at any level.