Instruction Manual

EN.
INTERCOM
DRIVERPILLION
When connecting two Shockwave units for Driver-Pillion Intercom for
the rst time, put the unit into Bluetooth® pairing mode (see Bluetooth
Connection section for details)
1. Once in pairing mode, double-press the centre button [C] to
enter Intercom pairing mode, you will hear an ‘Intercom Pairing’
message
2. The red [F] and blue [E] LED lights will begin to blink together as
the Shockwave looks for another unit to connect to
3. Repeat steps 1-3 on the second Shockwave unit
4. You will hear the message ‘Intercom Connected’ to conrm
connection, and the red [E] LED will ash once periodically while
the devices remain paired
AUDIO
CONTROL
1. When connected, the Shockwave will automatically play any
music that is played on the synced device
2. To skip track forward, double-press the Volume up [G] button
3. To skip track backwards, double-press the Volume down [A]
button
4. To turn the volume up press or hold the Volume up [G] button
5. To turn the volume down press or hold the Volume down
[A] button
6. To play and pause music, press the small play/pause [D]
button