User manual

RUSH Pin 1 CW user manual
7
Introduction
The Pin 1 CW is a small, powerful pinspot incorporating a single 10 W long-life
LED. It provides two focusable beam angles—7° and 11°—and is ideal for
projecting onto mirror balls or other applications for mobile DJ’s or small fixed
installations.
Fixture overview
1. Power inlet
2. Heat sink (do not cover)
3. Safety cable attachment point
4. Focus ring
Before using the product for the first time
1. Read Safety information on page 4 before installing, powering, operating
or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. Install a local power plug (not supplied) on the power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture.
5. Check the Martin Professional website at www.martin.com for the most
recent user documentation and technical information about the fixture.
RUSH by Martin™ user manual revisions are identified by the revision
letter at the bottom of the inside cover.