instructions
Read the instructions and keep them safe. If you pass the kettle on, pass on the instructions too. Remove all packaging, but keep it till you know the kettle works. important safeguards Follow basic safety precautions, including: 1 This kettle must only be used by or under the supervision of a responsible adult. 2 Don’t put the kettle, stand, cable, or plug in any liquid; don’t use the kettle in a bathroom, near water, or outdoors. 3 Don’t touch hot surfaces. Use the handle.
filling warning keep clear, steam may escape from the lid. 4 Remove the kettle from the stand. 5 Press and release the lid knob – the lid will spring open. 6 Fill with at least 2 cups of water, but not above max. 7 If you overfill, the kettle may spit boiling water. 8 Close the lid, and press down to lock it. 9 Check the lid is closed, or the kettle won’t switch off when it boils. switching on 10 Plug the stand into the wall socket. 11 Put the kettle on the stand – take care not to spill.
descale regularly – even in soft water areas 7 Limescale may be white, coloured, even rusty-looking, but it’s normally visible. 8 Phosphate scale isn’t generally visible, but it’s there, even in soft water areas. 9 All scale causes overheating, reduces the kettle’s life, and may trigger the boil-dry cut-out. 10 So, even with soft water, descale regularly, to help keep your kettle in working order. 11 Use a descaler suitable for plastic products (all kettles have plastic parts).
connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician. Don’t use a non-rewireable/moulded plug unless the fuse cover is in place. If you remove the plug, dispose of it. service If you ring Customer Service, please have the Model No. to hand, as we won’t be able to help you without it.