0 pr iz e dr aw Re e R g co ister ew lle o c n ar Se t yo line ds e b ur n G de ack rew ow t all er tai fo ard o ls r y Fr e £1 PL 0, US 0 0 instructions
Read the instructions, keep them safe, pass them on if you pass the iron on. Remove all packaging before use. A IMPORTANT SAFEGUARDS Follow basic safety precautions, including: 1 This iron must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children. 2 Don’t put the iron in liquid, don’t use it in a bathroom, near water, or outdoors. 3 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
19 The iron has a protective thermal fuse, which will blow if it overheats. If this happens, the iron will stop working, and must be returned for repair. 20 If the cable is damaged, return the iron, to avoid hazard. household use only U BEFORE USING FOR THE FIRST TIME • Don’t worry if the iron smokes a bit at first, it’ll stop as the element cures. • Iron an old piece of cotton fabric, to clean the soleplate. • Press the ~ and buttons 3 or 4 times, to check them out.
S STEAM IRONING 19 When steam ironing, you must set the temperature control at S or higher. 20 If you don’t, you’ll get water on your clothes, not steam. 21 Turn the steam control to the setting you want, S = no steam, # = high steam. 22 Wait till the light goes out, then start ironing. * SPRAY , Water spotting affects some fabrics. Test this out on a hidden part of the fabric. 23 This works with dry or steam ironing, as long as there’s water in the reservoir.
42 Press the ~ button (you’re using the “shot of steam” function vertically). 43 You may have to press it 2 or 3 times to pump water through the system. 44 Leave 4 seconds between shots, to let the temperature build up. C AFTER USE 45 Turn the temperature control to •, turn the steam control to S. 46 Unplug the iron. 47 Lift the top of the water inlet cover to open it. 48 Hold the iron over a sink, turn it upside down, and drain the water from the reservoir. 49 Sit the iron on its heel.
C ANTI-SCALE 72 The anti-scale agent incorporated in the iron helps prevent the build-up of scale. 73 Don’t use a descaling solution, or you’ll destroy the anti-scale agent.
D UK WIRING INSTRUCTIONS The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician. Don’t use a non-rewireable plug unless the fuse cover is in place. If you remove the plug, dispose of it.
