Product specifications

4
S STEAM IRONING
19 When steam ironing, you must set the temperature control at S or higher.
20 If you don’t, you’ll get water on your clothes, not steam.
21 Turn the steam control to the setting you want, S = no steam, # = high steam.
22 Wait till the light goes out, then start ironing.
* SPRAY
, Water spotting affects some fabrics. Test this out on a hidden part of the fabric.
23 This works with dry or steam ironing, as long as there’s water in the reservoir.
24 Check that there’s water in the reservoir.
25 Lift the iron off the fabric.
26 Aim the spray nozzle at the fabric.
27 Press the * button – you may have to press it 2 or 3 times
to pump water through the system.
S SHOT OF STEAM
28 This works with dry or steam ironing, as long as there’s water in the reservoir, and
the temperature is above S.
29 Check that the temperature control is at S or higher.
30 Lift the iron off the fabric.
31 Press the ~ button – you may have to press it 2 or 3 times to pump
water through the system.
32 Leave 4 seconds between shots, to let the temperature build up.
n DRY IRONING
33 If you’re going to be dry ironing for 20 minutes or more, empty the
reservoir first, to avoid spontaneous bursts of steam.
34 Turn the steam control to S.
35 Wait till the light goes out, then start ironing.
l VERTICAL STEAMING
36 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
37 Check that there’s adequate ventilation behind the fabric, otherwise moisture may
build up, causing mildew.
38 Check that there’s nothing behind the fabric that may be damaged by the steam.
39 Check that pockets, turn-ups, and cuffs are empty.
40 Turn the temperature control to max, turn the steam control to S.
41 Hold the iron close to (but not touching) the fabric.