Product specifications

4
16 The light will come on.
17 When the iron reaches the temperature you set, the light will go off. It’ll then cycle
on and off as the thermostat operates to maintain the temperature.
C REDUCING TEMPERATURE
18 This takes a bit longer, as the iron has to lose the heat it has built up, so be patient.
It’s best to organise your ironing so that you don’t need to reduce the temperature.
S STEAM IRONING
19 When steam ironing, you must set the temperature control at S or higher.
20 If you don’t, you’ll get water on your clothes, not steam.
21 Turn the steam control to the setting you want, S = no steam, # = high steam.
22 Wait till the light goes out, then start ironing.
* SPRAY
, Water spotting affects some fabrics. Test this out on a hidden part of the fabric.
23 This works with dry or steam ironing, as long as there’s water in the reservoir.
24 Check that there’s water in the reservoir.
25 Lift the iron off the fabric.
26 Aim the spray nozzle at the fabric.
27 Press the * button – you may have to press it 2 or 3 times to pump water through
the system.
S SHOT OF STEAM
28 This works with dry or steam ironing, as long as there’s water in the reservoir, and
the temperature is above S.
29 Check that there’s water in the reservoir.
30 Check that the temperature control is at S or higher.
31 Lift the iron off the fabric.
32 Press the ~ button – you may have to press it 2 or 3 times to pump water through
the system.
33 Leave 4 seconds between shots, to let the temperature build up.
n DRY IRONING
34 If you’re going to be dry ironing for 20 minutes or more, empty the reservoir first, to
avoid spontaneous bursts of steam.
35 Turn the steam control to S.
36 Wait till the light goes out, then start ironing.
m VERTICAL STEAMING
37 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
38 Check that there’s adequate ventilation behind the fabric, otherwise moisture may
build up, causing mildew.
39 Check that there’s nothing behind the fabric that may be damaged by the steam.
40 Check that pockets, turn-ups, and cuffs are empty.
41 Check that there’s water in the reservoir.
42 Turn the temperature control to max, turn the steam control to S.
43 Hold the iron close to (but not touching) the fabric.
44 Press the ~ button (you’re using the “shot of steam” function vertically).
45 You may have to press it 2 or 3 times to pump water through the system.