simply smoothie instructions
Read the instructions and keep them safe. If you pass the smoothie maker on, pass on the instructions too. Remove all packaging, but keep it till you know the smoothie maker works. important safeguards Follow basic safety precautions, including: 1 The smoothie maker must only be used by or under the direct supervision of a responsible adult. 2 Don’t put the smoothie maker in liquid, don’t use it in a bathroom, near a source of water, or outdoors. 3 Unplug before dismantling or cleaning.
before using for the first time 1 Turn to page 6 (care and maintenance), then disassemble, clean, dry, and reassemble the smoothie maker, to remove manufacturing debris, dust, etc. warning keep your hands away from the blades – they’re sharp positioning 2 3 4 5 Sit the motor unit on a dry, stable, level surface, near a power socket. Route the cable so it doesn’t overhang, and can’t be tripped over or caught. Press 2 to ensure everything’s off.
the controls 22 The buttons on the right of the smoothie maker are: 1 top button – low speed, for lighter jobs, using mainly liquid ingredients 2 middle button – high speed, for heavier jobs, using mainly solid ingredients 2 bottom button – this returns both 1 and 2 buttons to the “off” position, and switches the motor off f ice button – this button is spring-loaded, press to run the motor, let go to stop. Use this to reduce ice to slush, for icy drinks.
hot liquids 34 No matter how careful you are when using the smoothie maker, some splashing is inevitable. At higher temperatures, splashes on skin can hurt.
14 If this happens, turn the transparent part of the jug upside down and lift the blade unit and washer off with your fingernails. 15 Wash the cap, lid, stirrer, tap parts, jug, jug base, blade unit, and washer in warm soapy water, and leave them to drain dry. 16 Don’t use a cloth for drying. You may leave lint on the inside surfaces, and you’ll probably cut yourself on the blades. 17 There’s a Y-shaped guard in the hole the tap screws into. Clean this gently with a small bottle-brush.
recipes fresh fruit smoothies – these make 2 large smoothies strawberry & banana smoothie 300ml milk 1 large banana, roughly chopped 12 strawberries, stalks removed 4 ice cubes Put everything into the jug, ice cubes last. Run at low (1) for 10 seconds, then high (2) for 10 seconds. banana, vanilla & honey smoothie 400ml milk 1 large banana, roughly chopped 4 tsp honey 2 tsp vanilla extract 6 ice cubes Put everything into the jug, ice cubes last. Run at low (1) for 10 seconds, then high (2) for 5 seconds.
breakfast smoothie 4 tbsp natural yogurt 200ml milk 2 tbsp oatmeal or porridge oats 1 large banana, roughly chopped 2 tsp honey 2 apples, cored and roughly chopped 4 ice cubes Put everything into the jug, ice cubes last. Run at low (1) for 10 seconds, then high (2) for 15 seconds. chocolate orange smoothie 170g chocolate ice cream 300ml orange juice 4 ice cubes Put everything into the jug, ice cubes last. Run at low (1) for 10 seconds, then high (2) for 5 seconds.
peach & apricot smoothie 4 halves of tinned apricot (in juice) 80ml apricot juice (from tin) 2 peaches 4 tbsp natural yogurt 200ml milk 2 tsp honey 6 ice cubes Stone and roughly chop the peaches. Put everything into the jug, ice cubes last. Run at low (1) for 15 seconds, then high (2) for 15 seconds. berry fruity smoothie 300ml apple juice 90g raspberries 12 strawberries, stalks removed 4 ice cubes Put everything into the jug, ice cubes last. Run at low (1) for 15 seconds, then high (2) for 15 seconds.
baileys coffee cocktail 100ml milk 40g vanilla ice cream ½ tsp instant coffee 40ml baileys or irish cream liqueur 3 ice cubes Put everything into the jug, ice cubes last. Run at low (1) for 10 seconds, then high (2) for 5 seconds. strawberry gin fizz 100ml lemonade 60ml gin 1 tsp lemon juice 6 strawberries, stalks removed 5 ice cubes Put everything into the jug, ice cubes last. Run at low (1) for 10 seconds, then high (2) for 10 seconds.
connection The product doesn’t need an earth. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician. Don’t use a non-rewireable/moulded plug unless the fuse cover is in place. If you remove the plug, dispose of it. spare parts Note the Model No (on the rating label) and the parts you need, ring 0845 658 9700 or email service@saltoneurope.com for prices, then purchase using VISA or MASTERCARD.