Part No.
IMPORTANT SAFEGUARDS When using this appliance, basic safety precautions should always be followed, including the following: Read all instructions before, and follow whilst using this appliance. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. To protect against electrical hazards, do not immerse the power cord, plug or iron in water or any other liquid. Do not use outdoors or in damp or moist areas. Do not touch hot surfaces, always use the appliance handles.
Spectrum Brands Australia Pty Ltd Locked Bag 3004 Braeside Victoria 3195 Australia Spectrum Brands New Zealand Ltd PO Box 9817 Newmarket Auckland 1149 New Zealand Customer Service in Australia TollFree: 1800 623 118 Email: info@spectrumbrands.com.au Website: www.spectrumbrands.com.au Customer Service in New Zealand TollFree: 0800 736 776 Email: service@spectrumbrands.co.nz Website: www.spectrumbrands.co.
Warranty Conditions 4. The Goods must be used in accordance with the manufacturer’s instructions. This Warranty does not apply should the defect in or failure of the Goods be attributable to misuse, abuse, accident or non-observance of manufacturer’s instructions on the part of the user.
cool spray mist button steam burst button 5
BEFORE USING FOR THE FIRST TIME • • • • • • Remove labels, stickers and packaging from the iron and soleplate. Fill the water tank with clean water, and then empty the water to ensure the tank is clean of any manufacturing residues. Refill the tank. The iron may give off an odour and small amount of vapour when switched on for the first time. This is normal and will stop as the element cures. Press the burst of steam button 3 or 4 times, to prime and flush clean water through the burst of steam pump.
SWITCHING ON • • • • • • Turn the temperature control dial to 'nylon' and set the steam control to no steam. Sit the iron on its heel. Plug the power cord into the wall power outlet, and switch it on. A red light will illuminate. Turn the temperature control dial to bring the desired setting on the dial next to the mark on the tank. When the iron reaches the set temperature, the light will change to green. The temperature ready light will cycle ON and OFF as the thermostat operates to maintain temperature.
cool spray mist button BURST OF STEAM steam burst button Burst of steam works with both dry and steam ironing, as long as there is water in the tank, and the temperature control dial is set above wool. • • • • • Check that there is water in the tank. Check that the temperature control dial is set at wool or higher. Wait until the light switches to green. Press the burst of steam button – you may have to press it 2 or 3 times to pump water through the system.
SELF CLEAN To prevent residues building up, use the Self Clean button regularly, at least monthly in normal water areas, more often in hard water areas. You will require a sink or a large bowl to catch the water coming out of the soleplate. • • • • • • • • • • • • Fill the tank to the ‘max’ level. Sit the iron on its heel. Plug the power cord into the wall power outlet, and switch it on. Turn the temperature control dial to ‘max’. Wait until the light switches to green.
NOTES: 10
NOTES: 11
www.russellhobbs.com.au www.russellhobbs.co.nz RUSSELL HOBBS® and logo are Trade Marks of Spectrum Brands, Inc., or one of its subsidiaries. Manufactured in China to Spectrum Brands specifications. ©2015 Spectrum Brands, Inc.