Owner's Manual
Table Of Contents
4 XZone4 Installation Manual
Key Programming Features
The XZone4 has a programming feature called Web Config. This programming feature allows the installer
to connect to the XZone4 via its IP address or Host Name using any smartphone, tablet, or laptop and
configure it.
Web Config is designed to be used with a web browser. With Web Config, the XZone4 can be completely
configured, quickly and easily.
Web Cong Features
• General network configuration (DHCP/static IP)
• Firmware Updates
• Configure Zone Output Type – Speaker Level Outputs can be enabled
or disabled. Variable Line-Level Output is always active
• Assign device name (zone name) for each zone
• Zone Volume Trim
• Set AirPlay password for each zone (if desired)
• Enable/disable or re-order streaming services for each zone
• Enable/disable front panel LED’s (for use in installations where light
pollution is a concern, such as bedrooms)
• Enable/disable All On Participation for each zone
WEB CONFIGURATION
Web Config status page.
Conguration Password
In order to prevent unauthorized changes to conguration settings, a default
password of russound123 has been created that will be required to be
entered prior to changing any conguration settings. Enter this password
when prompted for a Conguration Password.
This password is separate from the Russound Certied Installer password that
is used to unlock the controller and cannot be modied.