How to Guide
3Rev. 1
Russound Acclaim OutBack Loudspeaker Installation Manual
Speaker
Mounting bracket
End cap Mounting knob
Grille
Bookshelf foot option
Speaker assembly
The bracket has screw slots to accommodate both wall and pole installation
options. The speaker sits in the speaker bracket's "C" openings and is pivoted
into place and secured with the mounting knobs. End caps provide a cosmetic
covering over the bracket's attach points.
An included bookshelf foot option mounts in place of the bracket for an
attractive upright shelf installation for a speaker pair.
SPEAKER ASSEMBLY
Painting the speaker
The speaker mounting bracket, enclosure, end caps, and grille can be
painted. If you paint the speaker, do not get paint on the speaker drivers. Also
be sure to minimize paint buildup so as not to clog the grille holes.
1. Gently pull o the speaker grille, making sure not to distort it.
2. Mask the speaker terminals and bae (the area on the front of the
enclosure that houses the drivers).
3. Paint the bracket, enclosure, end caps, and grille separately. Spraying is
ideal, but if you can’t spray the paint, a roller with a short or medium nap
will work better than a brush. Apply one or two light coats.
4. While the paint is still wet, clear any clogged holes in the grille with bursts
of compressed air.
5. After the paint has thoroughly dried, remove the masking. Gently press
the grille into place on the speaker, using even pressure around the edge.