ADP-1.2 manual 1/22/04 11:37 AM ADP-1.
ADP-1.2 manual 1/22/04 11:37 AM Page 2 Product Overview The ADP-1.2 speaker-level to line-level interface attenuates speaker-level audio from a stereo receiver or amplifier to create a line-level signal. This line-level signal can then be fed to a high-powered amplifier for those applications requiring greater power. Connection Instructions Connect the speaker-level outputs of the stereo to the detachable input connector of the ADP-1.2 using a four-conductor speaker wire.
ADP-1.2 manual 1/22/04 11:37 AM Page 3 Mounting Mount the ADP-1.2 using the two mounting brackets. Be sure that the bottom of the circuit does not rest against the mounting surface. See side view of ADP-1.2 in Figure 2.
ADP-1.2 manual 1/22/04 11:37 AM Page 4 Warranty The Russound ADP-1.2 is fully guaranteed against all defects in materials and workmanship for ten (10) years from the date of purchase. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is necessary, it must be performed by Russound.