Instruction manual

11
USER SECTION
Operation
A door station call takes precedence over
paging and intercom sessions and thus
interrupts them if they’re in progress when
the Call key is pressed.
To reply to a door station call, press and
hold the Talk key on a keypad within 15
seconds and speak. Release the Talk key
when you’re done speaking. When you
release the Talk key, the door station sounds
a single ping to let the caller know they can
answer your reply.
Note: You must use the Talk key to reply
to a door station call. For your privacy,
ComPoint doesn’t allow a hands-free reply
to a door station call.
After you reply to a door station call, the
caller has 7 seconds to answer your reply
hands free. After 7 seconds, the door
station pings twice to indicate the
time is up.
If more than 15 seconds have passed
since the door call, you can reselect
the door station and press the Talk
key to start a new session. This does
not ring the doorbell.
Door strike release
If your ComPoint system includes
optional ISDR1 Door Strike Release
Modules, you can activate them from
a keypad to unlock the doors. The
ISDR1 itself does not unlock the door;
rather, it provides a switch to control a
separate door strike release unit to unlock
the door.
To activate a Door Strike Release Module
from a Basic Keypad, press and hold the
corresponding door station key for 3 sec-
onds (figure 10).
Fig. 9. Door call indication on Basic and Advanced keypads
Fig. 10. Releasing a door strike on the Basic Keypad
Door station call (cont’d)