Installation manual
8 Russound DMS-3.1 Installation Manual
STANDALONE APPLICATION
The DMS-3.1 can be used in standalone mode solely as an Apple AirPlay
device. The DMS-3.1 must be on the same Local Area Network (LAN) as the
AirPlay enabled source of the content that is to be streamed.
In a standalone con guration, the DMS-3.1 audio outputs are connected
directly to the audio inputs of an audio receiver or multichannel ampli er
(shown) which will power the speakers located in di erent rooms of the
home. In this con guration, only content received from an AirPlay enabled
device will be available for playback.
The DMS-3.1 source ID switches will assign a unique name to each stream for
identi cation within the list of AirPlay speakers from you can stream content
to. On the AirPlay enabled source, press the AirPlay button [AirPlay icon
here] to select the stream on the DMS-3.1 which you wish to send content
to. Note that iTunes permits streaming of content to one or multiple AirPlay
speaker locations while iPod touch, iPhone, and iPad can stream to a single
AirPlay speaker location only. If using a Russound user interface, ‘AirPlay’ will
be displayed during use and the AirPlay stream will override any other mode
currently in use on the DMS-3.1.
R850MC Amplier
RCA cables
Speaker wires
DSM-3.1 Streamer
CAT5 Ethernet
iTunes with AirPlay
content support
Network router