Owner's Manual

TOACOUTLET
Figure 1
LED UGHTS RED
WITH POWER
Status Power: 12VDC 200mA 2.1 mm +tip -sleeve. Connecting a power sup-
ply to this connection will power the status connection. The green LED will
be illuminated when powered. This can be from a 12 volt trigger output or
from a wall type power supply plugged into a switched outlet of a stereo
receiver. If you are using products like the 858 that have a status indicator,
simply plug a 12 VDC power supply into the switched outlet and when the
receiver is turned on the status LED will be illuminated.
TO SWITCHED AC
OUTLET ON REAR
OF STEREO RECEIVER
Figure 2
LED LIGHTS GREEN
WITH POWER