Owner's Manual

IR Receiver In: This is a three terminal 1/8" plug that is common to many of
the free standing IR receivers. This will connect the power, ground and sig-
nal. Signal is Tip, ground is the ring and power is the sleeve.
854 MINI TABLETOP
IR RECEIVER
Figure 3
IR Common In: This is a two terminal 1/8" plug. Signal is tip, ground sleeve.
This can be connected the IR output of a stereo receiver or the common IR
output of an audio distribution system.
COMMON IR
OUTPUT
Figure 4
System Connection: Connect the IR system to the detachable connector
labeled + 12VDC, GND, STATUS and SIGNAL.
RUSSO UNO
858 RECEIVER
Figure 5
Emitter Outputs:
Connect up to 6 emitters to the emitter jacks labeled 1-6.
Place the emitters on the source equipment.
Figure 6
LED UGHTS BLUE
FOR IR CONFIRMATI
f-
z
LU
~
0....
:::J
0
LU
0
f-
Vl
Ct:
~
~
LU
~~--Nt- -1/ Ct:
IR Confirm: When an IR signal is received the IR confirmation blue LED will
flash.
Mounting: Mount the 857 near the source equipment to which the emitters
are attached.
SPECIFICATIONS
Dimensions: 3 ,/4"W x 1 7/s"H x 1"D
(83 x 47 x 25mm)
Weight: 6oz (.2kg)
OTHER RUSSOUND IR COMPONENTS
845.1 Single Infrared Emitter
IRB-1 In-Wall
Connecting Block
858 In-Wall
IR Receiver
1584.1 Dual Infrared Emitter
IRB-6 In-Wall
Connecting Block
854 Mini Tabletop
IR Receiver
Visit www.russound.com to view Russound's complete line of IR products.