Specifications

[phone] | www.russound.com
43
Speaker Selectors
Speaker Selectors
SS Series Resistor–Based Speaker Selectors Single Source Selectors
Shipping Weight
3.5 lbs (1.6kg)
Six pair speaker selector, single source, 70W/Ch RMS, zone labels. For use
with 4 Ω stable amplifiers & receivers. Built-in resettable fuses for circuit
protection. Impedance bypass switch for use with external imped-
ance matching volume controls.
11.5” W x 1.875” H x 6.25” D (29.5 x 4.8 x 16 cm)
SS-6.2
Four pair speaker selector, single source, 100W/Ch RMS, zone label. For use
with 4 Ω stable amplifiers and receivers. Built-in resettable fuses for circuit
protection. Impedance bypass switch for use with external impedance match-
ing volume controls.
8.5” W x 1.875” H x 6.25” D (22 x 4.8 x 16 cm)
SS-4.2
Shipping Weight
2.75 lbs (1.2kg)
Order #
3630-520679
Order #
3630-520686
Select your building blocks
Looks good. Sounds better. Priced right. Russound speaker selectors are the
building blocks of your multizone distributed audio system.
Choose from a variety of models with or without volume control. In-wall or
in-ceiling or outdoors. Even models that accommodate four to twelve pair of
loudspeakers.
On page 45, see our automatic amplifier selector, the AB-3.2. It lets you
connect two amplifiers to one set of speakers. It knows what source is on
and then switches to that amplifier.
Choices. For every budget. All you need to know is Russound.