Specifications

PlateMate
70
Plastic Work Boxes
P-Rings – Retrofit
CADMP1P
1 gang p-ring retrofit
2.5” W x 4.25” H x 1.5” D
(63.5 x 108 x 38.1 mm)
CADMPAL2
Shipping Weight
1oz (.05kg)
Order #
7200-119576
CADMPAL2
2 gang p-ring retrofit
4.25” W x 4.25” H x 1.5” D
(108 x 108 x 38.1 mm)
Shipping Weight
1oz (.05kg)
Order #
7200-119583
CADMP34P
3-4 (via cut-away partitions) gang
p-ring retrofit
7.875” W x 4.25” H x 1.5” D
(201 x 108 x 38.1 mm)
Shipping Weight
1.5oz (.05kg)
Order #
7200-119590
Plastic Work Boxes – New Construction
UL Classified and ICBO Recognized. Quick Click® and Auto Clamp are registered trademarks of the Pass and Seymour/Legrand
Corporation. Note: All Work Boxes must be purchased in 10 piece lots.
S1-18-R
S1-18-R
Single gang captive mounting nails.
Two Quick Click® entries for each end.
2.0625” W x 2.875” H x 3.125” D
(52.4 x 73.1 x 79.4 mm)
Shipping Weight
4oz (.1kg)
Order #
7200-450075
S1-22-R
Single gang captive mounting nails.
Two Quick Click® entries for each end.
2.0625” W x 2.9375” H x 3.4375” D
(52.4 x 74.7 x 87.4 mm)
Shipping Weight
5oz (.1kg)
Order #
7200-114694
S2-35-RAC
Double gang captive mounting nails.
Four Quick Click® entries for each end.
3.8125” W x 2.9375” H x 3.0625” D
(96.9 x 74.7 x 77.8 mm)
Shipping Weight
5oz (.1kg)
Order #
7200-450082
S3-54-RAC
Triple gang captive mounting nails.
Six Auto Clamps® for each end.
5.875” W x 2.9375” H x 3.125” D
(149.3 x 74.7 x 79.4 mm)
Shipping Weight
7oz (.2kg)
Order #
7200-450099