Specifications

[phone] | www.russound.com
77
SaphIR
SaphIR
SaphIR Connecting Blocks
Shipping Weight
6oz (.2kg)
Order #
5100-113321
IRB-1
IRB-1 is an effective way to connect an IR receiver to an IR control system. It
provides a single jack in the front panel for the IR receiver connection and screw
terminals at the rear for the in-wall IR wiring. Mounts in a single gang junction
box or p-ring and uses standard Decora cover plates. (available
in white only)
1.4375” W x 2.625” H x 1.625” D (36.6 x 66.7 x 41.3 mm)
IRB-6
IRB-6 is a wall-mounted IR connecting block. Front panel has 4 output jacks for
IR emitters, an input jack for a system connection and an input jack for IR system
power. A terminal block at the rear of the IRB-6 accepts connections from remotely
located IR receivers. Mounts in a standard single-gang junction box or p-ring and
uses standard Decora cover plates.
(available in white only)
1.4375” W x 2.625” H x 1.625” D (36.6 x 66.7 x 41.3 mm)
Shipping Weight
6oz (.2kg)
Order #
5100-113338
857
Shipping Weight
6oz (.2kg)
Order #
5100-115455
857 connecting block is the center of an IR installation. The 857 provides con-
nections for an IR Receiver, 6 emitters, a 12 volt power supply and a 12V Status
power supply. LED’s indicate power status and IR activity.
3.25” W x 1.85” H x 1” D (83 x 47 x 25 mm)
SaphIR Emitters
845.1
The 845.1 IR Micro Emitter is a stick-on emitter for controlling A/V equipment.
77” cable length.
.5” W x .375” H x .25” D
(12.7 x 9.6 x 6.4 mm)
Shipping Weight
6oz (.2kg)
Order #
5100-114076
1584.1
Shipping Weight
6oz (.2kg)
Order #
5100-113789
The 1584.1 Dual Head IR Micro Emitter is a stick-on emitter for controlling A/V
equipment. 77” cable length.
.5” W x .375” H x .25” D
(12.7 x 9.6 x 6.4 mm)