CA6.4 Central Controller/Amplifier Manual

Additional tools required to complete installation:
• A keyhole saw.
• Electrical junction boxes (6).
• A stud finder.
• A screwdriver (cordless recommended)
• Misc. hand tools, nails & screws.
• Cable staples.
6. Basic Planning and Layout Considerations
• Where will the speakers be located ?
• How will the wiring be routed to each location ?
• Where will the keypads be located ?
• Where is the equipment located ?
• Where is the CA6.4 controller going to be located ?
Connection Tips
• Disconnect all power cords before connecting to the CA6.4.
• Verify that all connections and polarity are correct.
• Keep all power cords away from all signal cables to prevent noise or humming.
• Choose reliable signal cables / patch cords.
• Label all wires with room location at both ends of the wire.
• Take your time!!! Don't panic about the number of wires; simply connect one at a time.
Speaker Wire Length Gauge of Speaker Wire
10-50 feet . . . . . . . . . . . . . . . . . . . . . . .18 AWG
50-100 feet . . . . . . . . . . . . . . . . . . . . . .16 AWG
100-150 feet . . . . . . . . . . . . . . . . . . . . .14 AWG
Over 150 feet . . . . . . . . . . . . . . . . . . . .12 AWG
INPUT FROM KEYPADS
65 43 2
OUTPUT TO 8Ω SPEAKERS
65 43 2
TUNER CD TAPE AUX
R
L
IR
L
INK
12345678 12345678 12345678 12345678 1234567
IR REMOTE OUTPUT
4321
USE #1 FIRST
CA6.4
NEWMARKET, NH U.S.A.
Source Inputs
Emitter OutputsIR Link Speaker Output
Connectors
Keypad Zone
Connectors
TUNER
CD
TAPE
AUX
• ON / OFF
• VOLUME
• SOURCE
SOURCE
REMOTE SENSOR
S
O
U
R
C
E
4
If you have problems or you are not
absolutely comfortable with what you are
doing, consult a professional carpenter,
electrician, or system installer.