BGD1 iBridge Dock Instruction Manual
Safety Precautions For your safety, please read and follow these precautions before installing or using this product: ➤ Read instructions. Read and understand all the applicable instructions before installing or operating the product. ➤ Retain documents. Keep this manual in a convenient place for reference. ➤ Heed warnings. Be aware of all warnings on the product and in the instructions. ➤ Follow instructions. Install and use this product only as described in the instructions.
Product Information Product Overview The BGD1 iBridge Dock allows you to use an iPod as a remote source for a Russound RNET® or other multiroom system. Used with a Russound RNET A/V Decoder, it provides either RNET or infrared (IR) control of the iPod, depending on the type of system. With a Russound RNET system, the BGD1 treats the iPod as a fully functional RNET smart source.
Typical Applications Connection to RNET system Multi-Zone Controller CAS44 Power Supply 4 Connection for IR control
Installation Connections Setup for RNET Control Note: The BGD1 iBridge Dock requires the use of an RAVD1 RNET A/V Decoder at the audio system, regardless of which system is used. 1. Connect Decoder to RNET system. With the audio system turned off, use an RJ-45 patch cable to connect from either RNET Link jack on the Decoder to an RNET Link jack on the system or an RNET source component.
Installation Setup for IR Control Firmware Update 1. Connect Decoder to audio system. With the audio system turned off, use an RCA patch cable to connect from the Decoder’s outputs to a source input on the audio system. Use an IR link cable or mono patch cable with 1⁄8-inch (3.5 mm) TS connectors to connect from the system’s IR output to the Decoder’s IR input. From time to time Russound may offer updated firmware for the BGD1 iBridge Dock.
Operation UNO-TS2 Touchscreen Control An UNO-TS2 touchscreen with an RNET system provides the most complete control and feedback option for the iPod. The touchscreen allows navigation through the iPod’s menus to select music by playlist, genre, artist, album, and song. It also displays current selections. Note: UNO-TS2 screen version 2.00.01 is required for use with iBridge. the display, or select the next or previous song with the > or < key.
Supported iPod Models Specifications • • • • • • • Switch: 8-position source/function selector RNET A/V connector: 8-pole modular RJ-45 jack OS Update Port connector: 4-pole jack for Programming Cable, Russound part #2500-521065 Power requirement: 12 VDC 1 A (adapter included) Dimensions: 4.72” W x 1.0” H x 2.5” D (12.0 x 2.5 x 6.4 cm) Weight: 5.