Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE PROFESSIONAL UNDERCOATING
Rust-Oleum Corporation Form: GDH-03
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 022813
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
PROFESSIONAL UNDERCOATING
Resin Type
Alkyd
Pigment Type
Black
Fill Weight
15 ounces
Solvents
Aromatics hydrocarbons and Ketones
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils (25-37.5µ)
Practical Coverage
at Recommended DFT
15-20 sq. ft./can
(1.4-1.9 m
2
/can)
Dry Times
at 77°F (25°C)
and 50%
Rel. Hum.
Touch
1 hour
Recoat
Within 1 hour or after 24 hours
Full Cure
72 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.