MSDS

ManualsBrandsRust-Oleum Automotive ManualsPaint1-qt. Acetone (4-Pack)

Material Safety Data Sheet

N/A: Not Applicable N/D: Not Determined N/E: Not Established N/R: Not Required Est.: Estimated

R-O Acetone MSDS (11-04-08).doc Page 1 of 6 pages.

Section 1 General Information

Manufacturer:

Rust-Oleum Corporation

11 Hawthorn Parkway

Vernon Hills, IL 60061

1-847-367-7700

Emergency Telephone: Chemtrec (800) 424-9300 Date: November 4, 2008

Product Name: Rust-Oleum Acetone

Product Codes: 248667 248668

Section 2 Hazardous Ingredients

OSHA ACGIH

Hazardous Component

CAS#

PEL TLV

Acetone 67-64-1 1000 ppm 500 ppm (TWA) - 750 ppm (STEL)

Section 3 Hazard Identification

Emergency Overview: This material is a clear, colorless liquid with a characteristic

fragrant, mint-like odor. It is extremely flammable and has a flash point of 0º F. The vapor is

heavier than air and may travel along the ground. Ignition of the vapor by distant ignition sources

is possible.

Primary Routes of Exposure:

Skin Contact

Eye Contact

Inhalation

Potential Acute Health Effects:

Eye: Contact may cause eye irritation.

Skin: May cause skin irritation. Repeated or prolonged contact with skin may cause dermatitis.

Ingestion: Substance may be harmful if swallowed. This substance may cause

gastrointestinal tract distress and central nervous system depression. May affect the liver and

kidneys.

AUTORF QT 4PK ACETONE

Summary of content (6 pages)

PAGE 1
Material Safety Data Sheet Section 1 General Information Manufacturer: Rust-Oleum Corporation 11 Hawthorn Parkway Vernon Hills, IL 60061 1-847-367-7700 Emergency Telephone: Chemtrec (800) 424-9300 Product Name: Date: November 4, 2008 AUTORF QT Acetone 4PK ACETONE Rust-Oleum Product Codes: 248667 248668 Section 2 Hazardous Ingredients Hazardous Component CAS# OSHA PEL Acetone 67-64-1 1000 ppm ACGIH TLV 500 ppm (TWA) - 750 ppm (STEL) Section 3 Hazard Identification Emergency Overview: This materi
PAGE 2
Inhalation: High vapor concentrations may be irritating to the eyes, nose, throat and lungs. Potential Chronic Health Effects: marrow. This substance may have effects on the blood and bone (See also Sections 4, 8, and 11for related information) Section 4 First Aid Measures Eye contact: Immediately flush eyes with water for at least 15 minutes. Get medical attention if irritation persists. Skin contact: Wash thoroughly with soap and water. Get medical attention if irritation develops or persists.
PAGE 3
Section 7 Handling and Storage Handling: Containers of this material may be hazardous when emptied. Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed. All 5 gallon pails and larger metal containers, including tank cars and tank trucks should be grounded and/or bonded when material is transferred. Avoid inhalation of vapors. Remove saturated clothing and flush affected areas with water.
PAGE 4
Boiling Point: 133°F Melting Point: Vapor Pressure: 180 mmHg Vapor Density: (Air=1) > 1 Odor Threshold: N/D Viscosity: Solubility in Water: Miscible -140°F N/D Specific Gravity: 0.79 Section 10 Stability and Reactivity Stability: Stable. Hazardous Polymerization: Will not occur Hazardous Decomposition Products: Burning can produce CO and/or CO2 Conditions to Avoid: Heat, sparks, open flame and all other sources of ignition Incompatibility: . Oxidizers and acids.
PAGE 5
otherwise altering this material may make the waste management information presented in this MSDS incomplete, inaccurate, or otherwise inappropriate.
PAGE 6
TSCA: The components of this mixture are listed in the Toxic Substance Control Act Inventory of Chemical Substances. This product does not contain any chemicals that require export notification under Section 12(b) of the TSCA regulation.