Use and Care Manual

TECHNICAL DATA
HAMMERED FINISH
Rust-Oleum Corporation Form: GDH-371
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 080514
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
HAMMERED FINISH
Resin Type
Oil Modified Alkyd
Pigment Type
Varies with color
Solvents
Acetone, Naphtha, Xylene
MIR
1.40 Max
Fill Weight
12 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mils (25-50µ)
Practical Coverage
at Recommended DFT
10-12 sq. ft./can
(0.90-1.09 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
15 minutes
Handle
90 minutes
Recoat
Within 1 hour or after 48 hours
Fully Dry
48 hours
Dry Heat Resistance
250°F (121°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.