Use and Care Manual

TECHNICAL DATA
ROC-149
RUST-OLUEM
®
TRUCK BED COATING
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 866∙585∙8430
www.rustoleum.com/automotive
Form: ARJ-1791
Rev.: 030619
PHYSICAL PROPERTIES
TRUCK BED COATING
Resin Type
Styrenated Acrylic
Pigment Type
Carbon Black
Solvents
Water, Ethanol, Dipropylene Gylcol Monobutyl Ether
Weight
Per Gallon
9.1 lbs.
Per Liter
1.09 kg
Solids
By Weight
41.9%
By Volume
32.9%
Volatile Organic Compounds
<200 g/l
Recommended Dry Film
Thickness (DFT) per Coat
2.5-4 mils
62.5-100µ
Wet Film to Achieve DFT
(Unthinned material)
7.5-12 mils
(187.5-300µ)
Practical Coverage at Recommended
DFT (assume 15% material loss)
140-160 sq.ft./gal.
Dry Times at 77°F
(25ºC) and 50% Relative
Humidity
Touch
2 hours
Handle
24-48 hours
Recoat
3 hours
Full Cure
5 days
Shelf Life
2 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.