MSDS

(See section 16 for abbreviation legend)
Conditions To Avoid: Avoid contact with strong acid and strong bases. Avoid temperatures above 120 ° F.
Incompatibility: Not applicable for this product. Incompatible with strong oxidizing agents, strong acids and strong alkalies.
Hazardous Decomposition: May produce hazardous fumes when heated to decomposition as in welding. Fumes may contain: carbon monoxide, carbon
dioxide, chlorine, hydrogen chloride, cyanide, and methylene diphenyl diisocyanate. By open flame, carbon monoxide and carbon dioxide. When heated to
decomposition, it emits acrid smoke and irritating fumes.
Hazardous Polymerization: Will not occur under normal conditions.
Stability: This product is stable under normal storage conditions.
Ecological Information: Product is a mixture of listed components.
Vapor Density:
Heavier than Air
Odor:
Slight Amine
Appearance:
Liquid
Evaporation Rate:
Slower than Ether
Solubility in H2O:
Slight
Freeze Point:
N.D.
Specific Gravity:
1.384
pH:
N.D.
Physical State:
Liquid
Section 10 - Stability And Reactivity
Section 11 - Toxicological Information
Chemical Name
LD50
LC50
Epoxy Resin
>5000 mg/kg (Rat)
N.E.
Aliphatic Polyamine
>2000 mg/kg (Rat, Oral)
N.E.
Titanium Dioxide
>7500 mg/kg (Rat, Oral)
N.E.
Anhydrous Citric Acid
N.E.
N.E.
Ethylene Glycol Monopropyl Ether
3089 mg/kg (Rat)
>2132 ppm (Rat, 6Hr)
Alkyl C12
-
C14 Glycidyl Ether
17100 mg/kg (Rat, Oral)
N.E.
Section 12 - Ecological Information
Page
4
of
7
261842 EPOXYS 1
-
GL KIT LOW VOC 1CAR GARAGE TAN
7/14/2011