Use and Care Manual

TECHNICAL DATA
ROC-264
RUST-OLEUM HOME
®
COUNTERTOP COATING KITS
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: [phone]
www.rustoleum.com/rohome
Form: ARJ-2551
Rev.:062923
PHYSICAL PROPERTIES
STEP 1 BASE COAT
STEP 2 TOP COAT
MARBLE GRAY
Resin Type
Water-based Acrylic
Pigment
Titanium Dioxide, Inerts
N/A
Titanium Dioxide, Inerts
Solvent
Water, Glycol Ethers
Weight
Per Gallon
10.1-10.6 lbs.
8.5 lbs.
9.69-10.9 lbs.
Per Liter
1.2-1.3 kg
1.0 kg
1.14-1.24 kg
Solids
By Weight
47.6-50.3%
34.2%
30-34%
By Volume
36.8-37.1%
35.7%
19-21%
Volatile Organic Compounds
<50 g/l
<50 g/l
60g/l
Recommended Dry Film Thickness (DFT)
Per Coat
1.5-2.0 mils
Wet Film Thickness (WFT) to Achieve
DFT
4.0-5.5 mils
Practical Coverage at Recommended DFT
75-100 sq. ft./qt.
Coverage will vary depending on surface porosity
and texture
7-9 sq. ft./bottle
Dry Times @ 77º F
(25°C) and 50%
Relative Humidity
Touch
2 hours
30 minutes
Recoat/Topcoat
4 hours
3 hours
Normal Use
24 hours
NA
Full Cure
7 days
24 hours
Flash Point
>200°F
Shelf Life
3 years
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.