Use and Care Manual

AEROSOLS TECHNICAL DATA IC-06
M1600/M1800 SYSTEM
PRECISION LINE
®
INVERTED MARKING PAINT
AEROSOL
Form: GDH-1099
Rev.: 052417
1
.DESCRIPTION AND USES .
Precision Line
®
is a general purpose inverted marking paint. Use
for marking concrete, pavement, gravel, grass, and more.
Precision Line is suitable for marking the location of underground
utilities at construction and excavation sites where identification is
desired.
.PRODUCTS .
SKU Description
WATER- BASED
1801838 Clear
1834838 Safety Green
1861838 Fluorescent Pink
1862838 Fluorescent Red
1868838 Safety Purple
1869838 Fluorescent Purple
1875838 Black
203031 Caution Blue
203032 Fluorescent Green
203033 Caution Yellow
203034 High Visibility Yellow
203035 Alert Orange
203036 Fluorescent Orange
203037 Fluorescent Red-Orange
203038 Safety Red
203039 White
205176 Fluorescent Blue
SOLVENT BASED
1601838 Clear
1634838 Safety Green
1661838 Fluorescent Pink
1662838 Fluorescent Red
1668838 Safety Purple
1669838 Fluorescent Purple
1675838 Black
201516 APWA Orange
203022 Caution Blue
203023 Fluorescent Green
203024 Caution Yellow
203025 High Visibility Yellow
203026 Alert Orange
203027 Fluorescent Orange
203028 Fluorescent Red-Orange
203029 Safety Red
203030 White
239007 Silver
PACKAGING .
Inverted 20 fl. oz. aerosol container, (17 oz. fill weight;
except 1801838 Clear and 239007 Silver: 16 oz. fill
weight), 12 aerosols/carton.
.PRODUCT APPLICATION .
SURFACE PREPARATION
ALL SURFACES: Remove loose contaminants by
sweeping the surface before application of the coating.
APPLICATION
Use when temperature is 40-90°F (10-32°C) and humidity
is below 85% to ensure proper drying. This product can be
used down to 25°F (-4°C) which may result in a slight
reduction of delivery rate. Protect surrounding surfaces
from overspray. Overspray can carry a significant distance.
Shake can vigorously for one minute after mixing ball is
heard. Invert can and point at ground or floor. Hold can 4
to 10 inches above surface to be marked. Press in
sideways to spray or use Rust-Oleum Marking Wand
(#2393000) or Rust-Oleum Marking Pistol (#210188).
Follow directions for proper use of this equipment. Keep
can moving to prevent build-up.
CLEAN-UP
Clean valve by spraying upright for 2-3 seconds after each
use. Properly discard empty container. Do not burn or
place in trash compactor. Empty container can be recycled
CLOGGING
If valve clogs, carefully remove spray tip and clean in
thinner. DO NOT insert any object into can valve opening.