Use and Care Manual

TECHNICAL DATA
MARINE COATINGS TOPSIDE PAINT
Rust-Oleum Corporation Form: GDH-162
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 120617
Vernon Hills, Illinois 60061 www.rustoleum.com
PHYSL t
TOPSIDE PAINT
Resin Type
Modified Alkyd
Pigment Type
Varies with color
Solvents
Aromatic Hydrocarbons
Weight
Per Gallon
7.4- 8.7 lbs.
Per Liter
0.89-1.04 kg
Solids
By Weight
45.1-54.1%
By Volume
36.8-38.0%
Volatile Organic Compounds
<500 g/l
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils
Wet Film to Achieve DFT
(unthinned material)
2.5-4.0 mils
Practical Coverage at Recommended DFT
(sq.ft./gal) (assumes 15% material loss)
100 sq.ft./quart
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1-2 hours
Handle
4-6 hours
Recoat
24 hours
Full Cure
3 days
Shelf Life
3 years
Flash Point
104°F (40°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.