Use and Care Manual

TECHNICAL DATA
MARINE COATINGS SPAR VARNISH
Rust-Oleum Corporation Form: GDH-359
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 050614
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSL t
SPAR VARNISH
Resin Type
Oil-Modified Urethane
Pigment Type
None
Solvents
Aromatic Hydrocarbons
Weight
Per Gallon
7.4 lbs.
Per Liter
0.90 kg
Solids
By Weight
49.5%
By Volume
43.8%
Volatile Organic Compounds
<450 g/l (<3.80 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT
(unthinned material)
2.0-4.5 mils
(50-87.5µ)
Theoretical Coverage at
1 mil DFT (25µ) sq.ft./gal
175 sq.ft./quart
(4.3 m
2
/l)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
75-150 ft
2
/quart
(1.8-3.7 m
2
/l)
Dry Times at 70°F
(21°C) and 50%
Relative Humidity
Touch
2 hours
Handle
4-6 hours
Recoat
8 hours
Shelf Life
3 years
Flash Point
109°F (43°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.