SDS

ManualsBrandsRust-Oleum Marine ManualsPaint1-hp. Anti-Slip Additive (6-Pack)

Rust-Oleum Marine Coatings Anti-Slip Additive easily mixes with

latex or oil-based paints and provides a skid-resistant coating for

wood, metal, fiberglass and concrete. Better than sand, Anti-Slip

Additive is made of a unique pumice material. It mixes evenly, not

settling to the bottom, and provides a uniform coat and a safer slip-

resistant surface. Use on any interior or exterior surface where slips

and falls are likely to occur. Ideal for floors, decks, stairs, ramps,

washrooms, ladders, patios, boat jettys, walkways and more. Anti-

Slip Additive will not change the color, performance or properties of

the paint.

Mixing:

Add one container of Anti-Slip Additive (1/4 pound) per quart of

coating. Stir additive thoroughly into paint until an even consistency is

achieved. Stir often during use to avoid settling. Follow application direc-

tions on Topside Paint can. Application of a coating containing the Anti-

Slip Additive by airless spray is not recommended.

Contains: Crystalline Silica that can cause cancer. Risk of cancer

depends on duration and level of exposure from dust produced by sand-

ing the coating surface. Quantity of respirable crystalline silica in bulk

form is less than 0.1% and overexposure is not expected during appli-

cation.

Use only with adequate ventilation. Do not breathe dust. Ensure

fresh air entry during application or drying. If you experience eye water-

ing, headache or dizziness or if air monitoring demonstrates vapor/mist

levels are above applicable limits, wear an appropriate, properly fitted

respirator (NIOSH/MSHA approved) during and after application. Follow

respirator manufacturer’s directions for respirator use. Close container

after each use. Avoid contact with eyes, skin and clothing. Wash thor-

oughly after handling.

First Aid: If you experience difficulty in breathing,

leave the area to obtain fresh air. If continued difficulty is experienced, get

medical assistance immediately. WARNING: This product is known to the

state of California to cause cancer.

We stand behind our products. If you are dissatisfied with this product,

contact Rust-Oleum Technical Services at 1-800-395-7878 for a refund

of the product purchase price.

Please note that the perfor-

mance of any marine coating

depends on many factors out-

side the control of Rust-Oleum,

including surface preparation,

proper application and environ-

mental conditions.

# 207009

207045 1103

Made in U.S.A.

1-800-481-4785

www.rustoleum.com

www.paintideas.com

Summary of content (1 pages)

PAGE 1
Mixing: Add one container of Anti-Slip Additive (1/4 pound) per quart of coating. Stir additive thoroughly into paint until an even consistency is achieved. Stir often during use to avoid settling. Follow application directions on Topside Paint can. Application of a coating containing the AntiSlip Additive by airless spray is not recommended. Contains: Crystalline Silica that can cause cancer. Risk of cancer depends on duration and level of exposure from dust produced by sanding the coating surface.