Use and Care Manual

TECHNICAL DATA OKN-03
OKON W-1™
WATER REPELLENT SEALER FOR DENSE CONCRETE AND MASONRY
MASONRY
Form: JPB-03
Rev.: 051713
2
.PRODUCT APPLICATION (cont.) .
Protect shrubbery, plants, and grass, glass, metal and
asphalt surfaces during application.
LIMITATIONS:
OKON W-1 does not provide protection against
hydrostatic water pressure, efflorescence caused by
internal moisture, or moisture penetration through cracks
in mortar, expansion joints or junctures between dissimilar
materials. W-1 will not fill large pores, bridge cracks, seal
inaccessible areas, or compensate for flawed construction.
Do not use on glazed or non-porous surfaces. Tinting
OKON W-1 is not recommended. Application of W-1 may
slightly darken the color and over application may build a
sheen on the surface. A mock-up should always be
performed and approved by property owner. To protect
more porous substrates – CMU, rough stucco, blasted
concrete - use OKON W-2 or OKON PLUGGER. Refer to
Technical Data Bulletin for detailed use instructions.
CLEAN UP
Clean hands and tools with soapy water. Drips and runs
that have dried may be removed using a strong solvent
within 24 hours after application. After that time sanding
may be necessary.
5-YEAR WATER REPELLENCY WARRANTY
Properly specified and applied applications of W-1 may
qualify for a 5-Year Warranty. Two coats are generally
required to achieve this performance standard. Not all
substrates can achieve this standard regardless of the
number of coats applied. Request OKON Warranty
procedure for details.
WARRANTY
The manufacturer will replace this product if, within 60
days of the date of purchase, it is shown to be defective
when used as directed. THE MANUFACTURER’S
LIABILITY UNDER ANY WARRANTY, WHETHER
EXPRESSED OR IMPLIED, IS LIMITED IN DURATION
TO 60 DAYS AND IS LIMITED SOLELY TO
REPLACEMENT OF THE PRODUCT AND DOES NOT
INCLUDE LABOR OR OTHER CONSEQUENTIAL
DAMAGES. Some states do not allow limitation on
how long an implied warranty lasts or do not allow the
exclusion or limitation of incidental or consequential
damages. So the above limitation or exclusion may not
apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state
to state.
KEEP FROM FREEZING
WARNING! KEEP OUT OF REACH OF CHILDREN
PERFORMANCE CHARACTERISTICS
Water Resistance by Immersion
ASTM 870 PASS
Water Resistance to 100% R.H.
ASTM D2247 PASS
Water Resistance Using Fog
ASTM D1735 PASS
Water Resistance to Condensation
ASTM D4585 PASS
UV Resistance - QUV 1000 Hrs Excellent.
Breathable
ASTM D1653 Yes
Water Absorption
ASTM C140 – max. after 24 hr. 5%
Water Vapor (Perms) Transmission
ASTM E96 16.62
Durability –
ASTM G53 – loss of water repellency <5%