MSDS

Steps To Be Taken If Material Is Released Or Spilled: Contain spilled liquid with sand or earth. DO NOT use
combustible materials such as sawdust. Remove all sources of ignition, ventilate area and remove with inert
absorbent and non-sparking tools. Dispose of according to local, state (provincial) and federal regulations. Do not
incinerate closed containers.
Handling: Follow all MSDS/label precautions even after container is emptied because it may retain product
residues. Use only in a well-ventilated area. Avoid breathing vapor or mist. Wash thoroughly after handling. Wash
hands before eating.
Storage: Do not store above 120 ° F. Store large quantities in buildings designed and protected for storage of
NFPA Class I flammable liquids. Contents under pressure. Do not expose to heat or store above 120 ° F. Keep
containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame.
Engineering Controls: Prevent build-up of vapors by opening all doors and windows to achieve cross-ventilation.
Use explosion-proof ventilation equipment. Use process enclosures, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended exposure limits.
Respiratory Protection: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2
requirements must be followed whenever workplace conditions warrant a respirator's use. A NIOSH/MSHA
approved air purifying respirator with an organic vapor cartridge or canister may be permissible under certain
circumstances where airborne concentrations are expected to exceed exposure limits.
Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is
any potential for an uncontrolled release, exposure levels are not known, or in any other circumstances where air
purifying respirators may not provide adequate protection.
Skin Protection: Nitrile or Neoprene gloves may afford adequate skin protection. Use impervious gloves to prevent
skin contact and absorption of this material through the skin.
Eye Protection: Use safety eyewear designed to protect against splash of liquids.
Other protective equipment: Refer to safety supervisor or industrial hygienist for further information regarding
personal protective equipment and its application.
Hygienic Practices: Wash thoroughly with soap and water before eating, drinking or smoking.
(See section 16 for abbreviation legend)
Section 7 - Handling And Storage
Section 8 - Exposure Controls / Personal Protection
Section 9 - Physical And Chemical Properties
Vapor Density:
Heavier than Air Odor: Solvent Like
Appearance:
Aerosolized Mist
Evaporation Rate:
Faster than Ether
Solubility in H2O:
Slight
Freeze Point:
N.D.
Specific Gravity:
0.787
pH:
N.A.
Physical State:
Liquid
Section 10 - Stability And Reactivity
Page
3
of
6
249066 PTOUCH 2X +SSPR 6PK SATIN SLATE BLUE