Use and Care Manual

TECHNICAL DATA
PAINTER’S TOUCH ULTRA COVER 2X ENAMEL SPRAYS
Rust-Oleum Corporation Form: CS1169
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 121313
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
Physical Properties
PAINTER’S TOUCH ULTRA COVER 2X ENAMEL SPRAYS
Resin Type
Acrylic Modified Alkyd
Pigment Type
Varies with color
MIR
1.4 Max
Fill Weight
12 ounces
Solvents
Acetone, Xylene
Recommended Dry Film
Thickness (DFT) per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at
Recommended DFT
(assumes 15% material loss)
7-8 sq.ft./can
(0.63-0.72 m
2
/can)
Dry Times at
70ºF (21ºC) and
50% Relative
Humidity
Touch
20 minutes
Handle
1 hour
Recoat
Within 1 hour or after 24 hours
Shelf Life
5 years
Flash Point
-156ºF (-104ºC)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.