Use and Care Manual

TECHNICAL DATA
PT2X-02
PAINTER’S TOUCH
®
2X ULTRA COVER SATIN SPRAYS
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877∙385∙8155
www.rustoleum.com
Form: GDH-1269
Rev.: 013019
PHYSICAL PROPERTIES
2X ULTRA COVER SATIN SPRAYS
Resin Type
Acrylic Modified Alkyd
Pigment Type
Varies with color
Solvents
Acetone, n-Butyl Acetate, Naptha, Xylene
MIR
Max 0.95
Fill Weight
12 oz.
Recommended Dry Film
Thickness (DFT) per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assume 15% material loss)
8-12 sq.ft./can
(0.74-1.11 m
2
/can)
Dry Times at 70F
(21ºC) and 50%
Relative Humidity
Touch
20 minutes
Handle
1 hour
Recoat
Within 1 hour or after 48 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.