MSDS

PAGE 1 MATERIAL SAFETY DATA SHEET
SECTION I
MANUFACTURER'S NAME Parks Corporation CHEMICAL NAME & SYNONYMS Urethane Alkyd
STREET ADDRESS One West Street CHEMICAL FAMILY Poly-urethane
CITY, STATE & ZIP Fall River, MA 02720 TRADE NAME PRO FINISHER OIL-BASE
EMERGENCY TELEPHONE [phone] POLYURETHANE GLOSS
SIZES/CODES 5 Gallon #13-0512
Gallon #13-0513
Quart #13-0514
FORMULAS N.A.
REVISED 04/18/00
SECTION II – HAZARDOUS INGREDIENTS
PAINTS, PRESERVATIVES & SOLVENTS
HAZARDOUS INGREDIENTS CAS # % TLV (PPM) PEL (PPM)
Aliphatic Hydrocarbons 8052-41-3 50 100 100
(Stoddard Type)
SECTION III – PHYSICAL DATA
BOILING POINT (
o
F) 315
o
F - 380
o
F SPECIFIC GRAVITY (H
2
O=1) 0.902
VAPOR PRESSURE (mmHg) 2 mmHg @ 68
o
F PERCENT VOLATILE
VAPOR DENSITY (AIR = 1) Heavier BY VOLUME (%) 56%
SOLUBILITY IN WATER Negligible EVAPORATION RATE Less than 1
APPEARANCE Yellow Clear (ETHER = 1)
ODOR Mild V.O.C. <450 g/l
SECTION IV – FIRE AND EXPLOSION HAZARD DATA
HMIS RATING
HEALTH: 1 FLAMMABILITY: 2 REACTIVITY: 0 PROTECTION: D
FLASH POINT (METHOD USED): 112
o
F (T.C.C.)
FLAMMABLE LIMITS
LEL: 0.9
UEL: N.A.
EXTINGUISHING MEDIA: Regular foam, carbon dioxide or dry chemical.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained breathing apparatus with a full face piece operated
in the positive pressure demand mode when fighting fires.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Never use welding or cutting torch on or near containers (even
empty) because product (even just residue) can ignite explosively. Keep containers tightly closed and isolate from
heat. Vapors are heavier than air and may travel along the ground or be moved by ventilation and ignited by heat, pilot
lights, other flames and ignition sources at locations distant from material handling point.
SECTION V – HEALTH HAZARD DATA
PERMISSIBLE EXPOSURE LEVEL: 100 PPM.
THRESHOLD LIMIT VALUE: 100 PPM. See Section II.