Instructions / Assembly

ManualsBrandsRust-Oleum Restore ManualsPaint1 gal. Oasis Blue Outdoor Furniture Coating

RESTORE Outdoor Furniture – Tips & Application Instructions

Page 1 of 4

READ ALL INSTRUCTIONS BEFORE BEGINNING

For videos, information, and helpful tips on preparation, deck application, concrete application, and

maintenance; visit rustoleum.com/restore.

1. SURFACES

Wood: Restore Outdoor Furniture should only be applied on structurally sound wood furniture, picnic tables, and

playsets.

NOT FOR USE ON: Smooth or floated concrete, fiberglass, tile, and metal surfaces. These surfaces will not allow

for proper adhesion. Do not use on driveways, garages, or other areas with vehicular traffic.

2. NEW WOOD

New wood may be wet with chemicals or have mill glaze from the manufacturing process. New wood should age

for a minimum of 6 months before applying Restore Outdoor Furniture. The lumber must dry completely before

applying the product to prevent peeling of the coating. The surface must also be properly cleaned and prepared

using Restore Deck & Concrete Cleaner to remove all foreign material and mill glaze prior to application. Follow

the PREPARATION instructions to be sure the Restore Outdoor Furniture adheres properly to the wood.

3. TINTING

Restore Outdoor Furniture tint base must be tinted at the store of purchase. DO NOT APPLY IF PRODUCT HAS NOT

BEEN TINTED.

4. COVERAGE

• One 1-quart can of Restore Outdoor Furniture will cover up to 20 square feet with two coats

· One 1-gallon can of Restore Outdoor Furniture will cover up to 80 square feet with two coats

* TWO THICK COATS ARE REQUIRED FOR EVERY SURFACE

5. SURFACE PREPARATION FOR WOOD

Stop, Watch, and Roll: For more information and helpful tips watch the Preparation with the Restore Deck Start

Wood Primer and/or Preparation with Restore Deck Stripper videos.

READ ALL INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING.

REGADLESS OF AGE OR SURFACE CONDITION, FAILURE TO FOLLOW ONE OF THESE PREPARATION METHODS WILL

RESULT IN POOR ADHESION AND POSSIBLE COATING FAILURE. NEW AND SEALED WOOD DECKS NEED TO

WEATHER AT LEAST SIX MONTHS BEFORE APPLICATION.

METHOD 1: PREPARATION WITH RESTORE DECK START WOOD PRIMER (HIGHLY RECOMMENDED)

Step 1 – Clean:

Clean the surface using a bristle brush and the Restore Deck & Concrete Cleaner. The surface must be completely

clean and free of dirt, grease, mildew and organic growth to ensure product bonding and adhesion. For mildew

and other organic growth use a diluted solution of household bleach (3 parts water to 1 part bleach) applied to the

surface before cleaning. Loose paint needs to be scraped and removed from the surface.

Step 2 – Light Repairs:

Raised nail heads and/or screws should be secured using a hammer or screwdriver. Remove loose splinters. Fill

larger cracks using RESTORE CRACK FILLER or a similar acrylic, non-silicone filler. Allow to dry.

Summary of content (4 pages)

PAGE 1
RESTORE Outdoor Furniture – Tips & Application Instructions Page 1 of 4 READ ALL INSTRUCTIONS BEFORE BEGINNING For videos, information, and helpful tips on preparation, deck application, concrete application, and maintenance; visit rustoleum.com/restore. 1. SURFACES Wood: Restore Outdoor Furniture should only be applied on structurally sound wood furniture, picnic tables, and playsets. NOT FOR USE ON: Smooth or floated concrete, fiberglass, tile, and metal surfaces.
PAGE 2
RESTORE Outdoor Furniture – Tips & Application Instructions Page 2 of 4 Step 3 – Apply Restore Deck Start Wood Primer: Using a synthetic bristle brush, saturate and apply generously in a consistent pattern. Work to a wet edge at all times. Apply thickly to the surface to ensure good penetration. Restore Deck Start Wood Primer appears milky during application but dies clear. Allow the primer to dry 1-2 hours before applying the solid topcoat over the primer.
PAGE 3
RESTORE Outdoor Furniture – Tips & Application Instructions Page 3 of 4 7. APPLICATION TWO THICK COATS OF RESTORE OUTDOOR FURNITURE ARE REQUIRED STEP BY STEP INSTRUCTIONS FOR APPLICATION STEP 1: Before using Restore Outdoor Furniture, mix material thoroughly and repeat mixing occasionally during application. Restore Outdoor Furniture is a thick coating that may be difficult to mix fully with just a stir stick. We recommend that you use a power drill with a mixing paddle.
PAGE 4
RESTORE Outdoor Furniture – Tips & Application Instructions Page 4 of 4 11. COATING MAINTENANCE Basic maintenance consists of keeping the surface clean from dirt, leaves, and other debris. Clean the surface seasonally and when necessary with Restore Deck & Concrete Cleaner, a bristle brush and a water hose. DO NOT USE A PRESSURE WASHER. Remove snow from the surface. DO NOT USE SALT ON THE SURFACE OF THE COATING 12. REMOVING RESTORE Restore products are made to last and adhere for long periods of time.