SDS
MATERIAL SAFETY DATA SHEET
Issue Date: 01-01-2010
=================================================================
SECTION I - PRODUCT IDENTIFICATION
-------------------------------------------------------------------------------------------------------------------------------------------
Product Name: Synta Solid Stain/ Restore Product Nos: 47000’s
Product Class: Water Based Coating Product Size: 1 US Gallon
HMIS Rating: Health = 0 Fire = 0 Reactivity = 0 C.A.S. Number: Mixture
=================================================================
SECTION II - Hazardous Ingredients
-------------------------------------------------------------------------------------------------------------------------------------------
Ingredients CAS # MAXIMUM CONTENT EXPOSURE LIMITS
------------------------ ----------------- --------------- -----------------
None
=================================================================
Section III - Physical Data
-------------------------------------------------------------------------------------------------------------------------------------------
Boiling Point: 168-396 Deg. F. Vapor Density: Heavier than Air.
Evap. Rate: Slower than n-Butyl Acetate. Specific Grav: 1.31
Appearance: Colloidal liquid.
=================================================================
Section IV - Fire and Explosion Hazard Data
-------------------------------------------------------------------------------------------------------------------------------------------
Flammability Class: N/A Flash Point: N/A LEL: N/A
- EXTINGUISHING MEDIA: Water, carbon dioxide or foam.
- SPECIAL FIREFIGHTING PROCEDURES: None known.
=================================================================
Section V - Health Hazard Data
-------------------------------------------------------------------------------------------------------------------------------------------
-PERMISSIBLE EXPOSURE LEVEL: None Assigned
-EFFECTS OF OVEREXPOSURE:
Inhalation - Vapors are irritation to the eyes, nose and throat.
Skin - Prolonged or repeated skin contact may cause irritation and dermatitis.
Eyes - Contact with eyes may cause burning and tearing.
-FIRST AID:
Inhalation - Remove victim to fresh air. If difficulty noted in breathing, get medical attention at once.
Skin - Wash affected areas with soap and water.
Eyes - Flush with water for fifteen minutes and get medical attention.
-PRIMARY ROUTE (S) OF ENTRY: Inhalation and skin contact.
-TOXICOLOGICAL INFORMATION:
This product does not contain 0.1% or more of any substance which is listed as a carcinogen by NTP,
IARC or OSHA.