MSDS

Page 4/9
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 15.02.2013
Revision: 15.02.2013
Trade name: RockSolid Decorative Chip
(Contd. of page 3)
8 Exposure controls/personal protection
·
Additional information about design of technical facilities:
No further data; see item 7.
·
8.1 Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
7727-43-7 barium sulphate, natural
PEL (USA)
REL (USA)
TLV (USA)
EL (Canada)
EV (Canada)
15* 5** mg/m³
*total dust **respirable fraction
10* 5** mg/m³
*total dust **respirable fraction
10 mg/m³
10 mg/m³
10 mg/m³
total dust
13463-67-7 titanium dioxide
PEL (USA)
REL (USA)
TLV (USA)
EL (Canada)
EV (Canada)
15* mg/m³
*total dust
See Pocket Guide App. A
10 mg/m³
10 mg/m³
IARC 2B
10 mg/m³
total dust
·
DNELs
No further relevant information available.
·
PNECs
No further relevant information available.
·
Additional information:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid close or long term contact with the skin.
·
Respiratory protection:
Use suitable respiratory protective device when high concentrations are present.
Use respiratory protection when grinding or cutting material.
·
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no rec omm endation to the glove m aterial can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
(Contd. on page 5)