Use and Care Manual

TECHNICAL DATA
RSD-02
ROCKSOLID
®
METALLIC
GARAGE FLOOR COATING KIT
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877∙385∙8155
www.rustoleum.com
Form: GDH-605
Rev.: 020119
PHYSICAL PROPERTIES
Resin Type
Cycloaliphatic Amine Converted Urethane Modified Epoxy
Pigment
Varies with color
Solvent
Benzyl Alcohol, Isophorone Diamine, Nonylphenol, Diglycidyl Ether
Weight
Per Gallon
9.1-9.3 lbs.
Per Liter
1.09-1.11 kg
Solids
By Weight
96%
By Volume
97%
Volatile Organic Compounds
<1 g/l
Practical Coverage
One kit covers 100-125 square feet
(coverage rate can vary depending on texture and porosity of concrete)
Pot Life
45 minutes to 1 hour (depending on temperature and humidity)
Dry Times @ 70-80º F
(21-27°C) and 50%
Relative Humidity
†
Touch
6-9 hours
Recoat
After a minimum of 12 hours and before 7 days*
Foot Traffic
8-10 hours
Vehicle Traffic
24-36 hours depending on temperature
Shelf Life
60 months unopened factory delivered pouches
Flash Point
205°F (96°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
†
Dry times will be increase if temperatures are less than 55ºF (13ºC).
* If 7 days recoat time has elapsed, the coating must be sanded prior to recoating.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.