SDS

Date Printed: 1/12/2017
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash it before reuse.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local, regional and national regulations.
GHS SDS PRECAUTIONARY STATEMENTS
P363 Wash contaminated clothing before reuse.
3. Composition/Information On Ingredients
HAZARDOUS SUBSTANCES
Chemical Name CAS-No. Wt.%
Range
GHS Symbols
GHS Statements
Bisphenol A Epoxy Resin 25085-99-8 50-75 GHS07 H315-317-319-335
Neopentyl Glycol Diglycidyl Ether 17557-23-2 10-25 GHS07 H315-317
Titanium Dioxide 13463-67-7 2.5-10 Not Available Not Available
1-Chloro-4-(Trifluoromethyl)Benzene 98-56-6 2.5-10 GHS07 H315-319-332-335
Carbon Black 1333-86-4 0.1-1.0 Not Available Not Available
2,6-Dimethyl-4-Heptanone 108-83-8 0.1-1.0 GHS02-GHS06 H226-331-335
Stoddard Solvent 8052-41-3 0.1-1.0 GHS08 H304-372
4. First-aid Measures
FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical
attention. Do NOT allow rubbing of eyes or keeping eyes closed.
FIRST AID - SKIN CONTACT: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation
develops or persists.
FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Get immediate medical attention. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the
area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
FIRST AID - INGESTION: If swallowed, rinse mouth with water. If feeling unwell, get medical attention. Swallowing less than an
ounce will not cause significant harm. For larger amounts, do not induce vomiting, but give one or two glasses of water to drink and
get medical attention.
5. Fire-fighting Measures
EXTINGUISHING MEDIA: Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
UNUSUAL FIRE AND EXPLOSION HAZARDS: Keep containers tightly closed. FLASH POINT IS TESTED TO BE GREATER
THAN 200 DEGREES F. No unusual fire or explosion hazards noted.
SPECIAL FIREFIGHTING PROCEDURES: Water may be used to cool closed containers to prevent buildup of steam. If water is
used, fog nozzles are preferred.
6. Accidental Release Measures
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: If spilled, contain spilled material and remove with inert
absorbent. Dispose of contaminated absorbent, container, and unused contents in accordance with local, state, and federal
regulations. Do not incinerate closed containers
7. Handling and Storage
Page 2 / 5