TDS

TECHNICAL DATA
ROCKSOLID
®
20X DECK RESURFACER
2 Form: GDH-1260
Rev.: 020918
PRODUCT APPLICATION (cont.) .
Allow 4-6 hours to dry to touch. Allow to dry 24 hours if the
temperature is between 50° and 90°F and 48 hours if the
temperature is between 40° and 50°F, before light foot traffic and
replacing furniture. If the surface is tacky or soft, extend the drying
time before putting heavy objects back in place. Full cure to a hard
finish will take approximately 7 days. Drying times may vary
depending on temperature and humidity.
FOR SMOOTHER TEXTURE: While the coating is still wet, use
a brush and lightly brush the product in the opposite direction as
rolled.
COVERAGE
Up to 40 square feet per gallon (volume after tinting). One coat is
required. Actual coverage may vary based on wood type, age
and surface porosity.
PRODUCT APPLICATION (cont.) .
CLEAN-UP
Use mild soap and water.
KEEP FROM FREEZING . CLOSE CONTAINER AFTER
EACH USE TO PRESERVE PRODUCT.
CAUTION: Exterior horizontal surfaces, coated or uncoated,
exposed to sun and warm temperatures can create surface
temperatures not suitable for bare feet or animal paws.