TDS

TECHNICAL DATA
ROCKSOLID
®
2X SOLID STAIN
Rust-Oleum Corporation Form: GDH-1074
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030718
Vernon Hills, Illinois 60061 www.rustoleum.com
PHYSICAL PROPERTIES .
* Coverage is based on one coat.
2X SOLID STAIN
Resin Type
Water-based Acrylic blended with Polyurethane
Pigment Type
Titanium Dioxide and Inert Pigment
Solvents
Glycol Ethers, Water
Weight
Per Gallon
9.7 lbs
Per Liter
1.16 kg
Solids
By Weight
43.9%
By Volume
34.6%
Volatile Organic Compounds
<100 g/l (0.83 lbs./gal.)
Recommended Dry Film Thickness (DFT)
Per Coat
2 mils
Practical Coverage at Recommended
DFT
Approximately 250 sq.ft./gal. (volume after tinting) One coat is required.
Coverage Rate*
(1 coat application)
1 gallon: Up to 250 square feet
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2-4 hours
Light Traffic
24 hours
Replace Furniture
24 hours
Full Cure
7 days
Shelf Life
3 years
Flash Point
>200ºF (93ºC)
Storage
Protect from freezing
Safety Information
For additional information, see the SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.