MSDS

Page 6/13
Safety Data Sheet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
OSHA GHS
Printing date 07.10.2014 Revision: 07.10.2014
Trade name: RockSolid Safe Etch
(Contd. of page 5)
39.4.1
·
8.2 Exposure controls
·
Personal prot ective equipm e nt:
·
General protective and hygienic meas ures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
·
Respiratory protection:
Suitable respiratory protective device recommended.
For spills, respiratory protection may be advisable.
·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation.
·
M aterial of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
·
For the perm anent contact gloves made of the following materials are suitable:
Butyl rubber, BR
Neoprene gloves
·
Eye protection:
Contact lenses should not be worn.
Safety glasses
·
Body protecti on:
Acid resistant protective clothing
·
Limitation and supervision of exposure into the environment
No further relevant information available.
·
Risk management measures
See Section 7 for additional information.
No further relevant information available.
(Contd. on page 7)